LT10M Manual Pallet Tilter, LT10E Eelectric Pallet Tilter

Introduction of pallet tilter

LT series lift and tilt pallet jack are designed to lift the pallet and tilt it to the ergonomic angle. LT10M manual pallet tilter & LT10E electric pallet tilter are worked to allow the users to ergonomically reach loads easily without having to bend down or over-stretch. The Electric tilt pallet jack has forced steering on one wheel to make manoeuvring easy. Lift /lower functions are controlled by a switch on the control lever. Tilt/return functions are controlled by a remote control, which is fitted with a long wire, and can make the operator and the tilter with load keep a certain distance, more safer. Lift /lower function and Tilt/return functions can be operated independently of each other or simultaneously. When Tilt/return functions are to be used, the tilter must be on a firm surface, and the universal wheel shall be braked. When Tilt/return functions are to be used to stack materials, the handle can be turned to the side to make access to the stack table easier.

As a pallet tilting equipment, this pallet jack tilter can be used as a pallet truck and also a tilting pallet truck, this can not only improve your work efficiency, but also save costs.

Håndtaget kan drejes og låses på plads væk fra arbejdsområdet. Det gælder både siddende og stående positioner. Gafler på pallets vippestik kan vippes op til 90 grader. De leveres begge som standard med parkeringsbremse og fodbeskyttere.

Overholder EN1757-1 og EN1175

Details of pallet tilter

LT0M manual pallet tilter LT10E electric pallet tilter

We have this item in stock in France/US, if you are located in Europe or US, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of pallet tilter

i-lift Nej		1520902	1520903
Model		LT10M	LT10E
Type		brugervejledning	Elektrisk
Kapacitet	kg (lb.)	1000(2200)
Løftehøjde, lodret	h mm (in.)	285(11.2)
Min.fork højde	h1 mm (in.)	85(3.3)
Gaffellængde	I mm (in.)	800(31.5)
Håndtagets højde	L1 mm (in.)	1138(44.8)
Samlet gaffelbredde	b mm (in.)	560(22)
Bredde mellem gafler	b1 mm (in.)	234(9.2)
Gaffelspids længde fra rulle	L2 mm (in.)	135(5.3)
Samlet bredde	B mm (in.)	638(25.1)
Samlet længde	L mm (in.)	1325(52.2)	1410(55.5)
Samlet højde, hævet	H mm (in.)	950(37.4)
Samlet højde, sænket	H mm (in.)	750(29.5)
Indlæsningscenter Min./Max.	C1 mm (in.)	200/400(8/16)
Indlæsningscenter Min./Max.	C2 mm (in.)	200/420(8/16.5)
Strømforsyning	KW / V	--	0.8/12
Nettovægt	kg (lb.)	178(391.6)	185(407)

Sikkerhedsregler

1. Driving the pallet tilter on the slope

1) The pallet tilter shall be unloaded or a small load.

2) Lasten skal være i den laveste position.

3) The gradient shall be no more than 2° when dragging the pallet tilter.

4) Operatøren skal være i den øverste position, uanset om der opgraderes eller nedjusteres.

2. Avoid offset loads

Belastningen skal fordeles jævnt på gafler eller paller, med en afstand på 400 mm mellem tyngdepunkt og gafler foran, den maksimale højde på tyngdepunktet er 420 mm, minimum 200 mm, afstanden ud af dette omfang reducerer niveauet for sikkerhed og øge risikoen.

Varer på paller eller gafler skal sikres korrekt, undgå ubalance af lasten, så de ikke kan falde af under transport, når trucken er løftet, eller når trucken skal forblive løftet i et stykke tid.

3. Driving loaded

The tilting pallet jack is designed for use on even and level floor. During transport the forks shall be raised as little as possible. Transport with raised forks should be made over the shortest possible distances and at low speed. Do not transport when tilting goods on the pallet tilter, this is not safe.

Advarsel: Placer aldrig hænder eller fødder på de bevægelige dele, hvis der er risiko for personskade.